Android boxes and phones require the same setup instructions. Please follow along carefully. 

1. Go to the Google Playstore on your device and install the STB Emulator app. You have two options. Choose between the free version (contains ads banner at the top) or you can pay $7.49 CAD and download the ad free version. 

2. If this is the first time you are using this app, the first page you will see is a grey greetings page. Click the configure button located on the bottom left. 

3. You are now on the Settings page. Please select Profiles. 

4. You will see a profile named ” New profile #xxxxxx “. Please select profile.

5. Use the first option to change the profile name to ForeverTV

6. Go to Portal Settings, and then Portal URL, change the Portal URL as seen below. Make sure that you put in the Portal URL on the top, NOT the Internal Portal URL in the bottom.

http://linux-app.tv:8080/c

7. Go back to Profile Settings and select STB Configuration. 

8. You will see a MAC address starting with 00:1A:79. Take a moment to copy that MAC address.

9. Place your order for a subscription here and provide that MAC address in the MAC Address box at checkout. 

10. Back out of all the pages until you are back to the home screen. 

11. Make payment for your order and await for “Activation Confirmation” email from us. This can take up to three hours, but we are usually faster than that.

12. Once you have confirmation that your subscription is activated. While you are on the home screen,  click on the menu button on your Android box remote or select the top right corner of the screen to toggle grey drop down menu. 

13. From the grey drop down menu, select your Zon2 or ForeverTV profile.

14. IPTV service will begin to load.

Common mistakes and issues.

There are a few things you should check if your service does not start.

Please wait until you receive a confirmation email from us stating that your device has been activated. Trying to load the portal before will result in a username/authentication request or a “STB is blocked message”.

After receiving an activation confirmation email and if  you still get a username/password screen, it means that the MAC address you provided to us does not match the one in the STB Emulator settings. Please double check the MAC address and provide us with the correct one.

If you get a “Host not found” error message, it usually means that you typed the Portal URL incorrectly or your device is not connected to the internet.

If you receive a message stating that the firmware is outdated, it most likely means that you have entered the Portal URL incorrectly. Back to the top

For ForeverTV you have the option to use ForeverIPTV app on Android boxes and phones.  

1. Go to the Google Playstore on your device and install the ForeverIPTV app (Free). There are two different ForeverTV apps, make sure you download and install the app below

https://www.google.com/amp/s/m.apkpure.com/forever-iptv/com.foreveriptv.foreveriptvobox/amp

2. Place your order for subscription here and make note on the checkout form that you use ForeverIPTV app. 

3. Make payment for your order and await for “Activation Confirmation” email from us. This can take up to three hours, but we are usually faster than that.

4. Once you receive the username and password from us, put it in the ForeverIPTV app 

5. IPTV service will begin to load.

1. Go to Device Settings – Developer Options – Enable apps from unknown sources

2. Go to the Amazon app store and download an app called “Downloader”. 

3. Open Downloader app, type in URL https://sundayiptv.com/stbemu/stbemu.apk to download the STB Emulator app onto your Firestick. 

4. If this is the first time you are using this app, the first page you will see is a grey greetings page. Click the configure button located on the bottom left. 

5. You are now on the Settings page. Please select Profiles. 

6. You will see a profile named ” New profile #xxxxxx “. Please select profile.

7. Use the first option to change the profile name to V2TV or ForeverTV accordingly. 

8. Go to Portal Settings, and then Portal URL (NOT Internal Portal), change the Portal URL as seen below.

• http://linux-app.tv:8080/c 

9. Go back to Profile Settings and select STB Configuration. 

10. You will see a MAC address starting with 00:1A:79. Take a moment to copy that MAC address.

11. Place your order for a subscription here and provide that MAC address in the MAC Address box at checkout. 

12. Back out of all the pages until you are back to the home screen. 

13. Make payment for your order and await for “Activation Confirmation” email from us. This can take up to three hours, but we are usually faster than that.

14. Once you have confirmation that your subscription is activated. While you are on the home screen,  click on the menu button on your Android box remote or select the top right corner of the screen to toggle grey drop down menu. 

15. From the grey drop down menu, select your ForeverTV profile.

16. IPTV service will begin to load.

Common mistakes and issues.

There are a few things you should check if your service does not start.

Please wait until you receive a confirmation email from us stating that your device has been activated. Trying to load the portal before will result in a username/authentication request or a “STB is blocked message”.

After receiving an activation confirmation email and if  you still get a username/password screen, it means that the MAC address you provided to us does not match the one in the STB Emulator settings. Please double check the MAC address and provide us with the correct one.

If you get a “Host not found” error message, it usually means that you typed the Portal URL incorrectly or your device is not connected to the internet.

If you receive a message stating that the firmware is outdated, it most likely means that you have entered the Portal URL incorrectly. Back to the top

Some examples of IPTV boxes include the Formuler z7+, Dreamlink T2 or BuzzTV XPL 300 boxes (there are many more examples).

IPTV boxes use there own app to stream our service. So the exact instructions might be a little bit different depending on what box you are using. Below are steps you need to follow

1. Provide us with the MAC address starting with 00:1A:79 when you place an order for a subscription.

2. The MAC address can usually be found on a sticker somewhere on the box or in the box settings page.

3. Under Portal Settings, enter in the Portal URL as seen below. 

• http://linux-app.tv:8080/c

4. Make payment for your subscription here and wait the activation confirmation email.

5. Once you receive the confirmation that your device has been activated, reboot the box and load the portal.

Common mistakes and issues.

If you have received an email confirmation stating your service has been activate but you are still getting an authentication screen, it usually means that there is discrepancy in the MAC address you provided to us and that of your device. Please double check and provide us with the correct MAC address.

If you get a message that states firmware is outdated or path to portal is not found, it means that you have entered the MAC address incorrectly. Back to the top

1. Go to settings

2. Select System Settings

3. Go to Servers

4. Select Portals

5. Under Portal Name enter in ForeverTV

6. Enter in the Portal URL seen below

• http://linux-app.tv:8080/c

7. Provide your MAC address starting with 00:1A:79 to us when you place your order here. 

8. Send payment for your order and wait for the “Activation Confirmation” email from us.

4. Reboot your device and restart the portal. 

Here’s useful video.

Common mistakes and issues.

If you get a a never ending loading screen it usually means we have not yet activated your service or there is a discrepancy in the MAC address you provided and the one we activated. 

You will need to install the Smart-STB app on your TV in order to use our service.

Luckily, it is pretty easy to install and configure. Here is a great video that you might find useful.

1. From your app store, install the Smart-STB app on your Samsung or LG television

2.Open the app and go to the Device Info page. Copy the Software ID and Virtual MAC address.

3. Head to the Smart-STB website and choose between there 7 day free trial, monthly membership, or lifetime fee.

4. Register the Software ID on the website.

5. Enter portal URL of the server 

• http://linux-app.tv:8080/c

6. Go back to the app and select Portal. Re-enter the Portal URL http://linux-app.tv:8080/c

7. Place an order on our website for subscription and provide us with Virtual MAC address

8. Make payment and wait for activation confirmation email. 

9. Reboot the device and load the Custom portal you created. It should load momentarily.

Common issues and mistakes.

If you get a message stating that your firmware needs to be updated, you have most likely entered the Portal URL incorrectly.

If you get an authentication screen asking for a username/password, it usually means that we have not yet activated your service or the Virtual MAC address you provided to us does not match the one on the app.

If you don’t have access the the custom portal on the app, it usually means that you did not register the Software ID under “Device Info” on the Smart-STB website. 

You will need to install the XtremeIPTV for ForeverTV onto your device.

The XtremeIPTV app is supported by iPhone, iPad and Apple TV.

Macbook device is not supported.

Below is the instruction.

1. Download and Install the XtremeIPTV (Free) for ForeverTV from the app store

2. Place an order for a subscription here. In the Order notes box, specify that you will be using the XtremeIPTV app for iOS device.

3. We don’t need any MAC address from customers when using the Apple devices so no need to provide it. 

4. Make payment for your order.

5. Wait for confirmation email from us providing you with a username and password.

• Portal url will be http://forevertv.me:8080